Carbotech Brake Pads

MAZDASPEED MOTORSPORTS is proud to announce we now have  Carbotech brake pads in stock for popular Mazda models.

We are carrying the  XP10, XP12 and some XP8 compound pads for. Compound descriptions are below.

Part numbers ending with -C1 = XP10 compound;  -C2 = XP12 compound and -C8 = XP8 compound.

The following part numbers/applications are currently available:

1.6 MIATA

0000-03-5101-C1        PAD SET, FRONT (XP10)

0000-03-5101-C2        PAD SET, FRONT (XP12)

0000-03-5111-C8        PAD SET, REAR (XP8)

0000-03-5111-C1        PAD SET, REAR (XP10)

1.8 MIATA

0000-03-5102-C1        PAD SET, FRONT (XP10)

0000-03-5102-C2        PAD SET, FRONT (XP12)

0000-03-5112-C8        PAD SET, REAR (XP8)

0000-03-5112-C1        PAD SET, REAR (XP10)

2006-UP MX-5

0000-03-5104-C1        PAD SET, FRONT (XP10)

0000-03-5104-C2        PAD SET, FRONT (XP12)

0000-03-5114-C8        PAD SET, REAR (XP8)

0000-03-5114-C1        PAD SET, REAR (XP10)

0000-03-5114-C2        PAD SET, REAR (XP12)

2004-up RX-8

0000-03-8101-C1        PAD SET, FRONT (XP10)

0000-03-8101-C2        PAD SET, FRONT (XP12)

0000-03-8111-C8        PAD SET, REAR (XP8)

0000-03-8111-C1        PAD SET, REAR (XP10)

0000-03-8111-C2        PAD SET, REAR (XP12)

Carbotech XP8™ (1108™): A high torque brake compound with a wide operating temperature range (200°F-1350°F+). Carbotech XP8™ is the first of our racing compounds. Outstanding initial bite at race temperatures, high coefficient of friction, excellent modulation and release characteristics. Extremely high fade resistance, very rotor friendly with 100% non-corrosive dust. Excellent as a front brake pad for lighter ITA, ITB, ITC, SRF, H4, H5, and other cars that weigh less than 2,400lbs. Perfect for novice, intermediate and advanced track day (HPDE) use with any tire, and can still be driven safely to and from the track. There are several vehicles that use XP8™ on the street, autocross, and at track day (HPDE) events. Carbotech does NOT recommended XP8™ as a daily driven street pad due to elevated levels of dust and noise. XP8™ is also a great rear brake pad for almost any race car (Spec Miata-T1/T2/CMC). XP8™ is a great compound on the front & rear of most open wheel and sports racers.

Carbotech™ XP10™ (1110™): When Carbotech unleashed the XP10™ to the general public, and it was an instant success, gathering multiple regional, divisional, and national championships. The XP10™ is a very high initial bite friction material, with a coefficient of friction and rotor friendliness unmatched in the industry. Fade resistance is in excess of 1650°F. Due to the high level of friction and bite, this material is recommended for cars weighing around 2,000lbs or more, not including formula cars and cars with brake bias bars weighing less than 2,000lbs. This is the preferred compound for the front of Spec Miata racers, SSC,SSB, T3, SRF, ITS, ITE, H1,H2, H3, H4, 944 Cup, ST, GS, Factory Five Cobra’s and many more Grand-Am/ALMS/SCCA/NASA classes. XP10™ is also ideal for advanced/instructor level HPDE drivers. XP10™ still maintains the highly praised release and excellent modulation, rotor friendliness, and 100% non-corrosive dust that have made all Carbotech compounds so successful. XP10™ is not recommended as a daily-driven street pad due to possible elevated levels of dust and noise.

Carbotech™ XP12™ (1112™): The latest iteration of the highly successful XP™ series of compounds with an extremely high initial bite, torque and fade resistance than compound XP10™. XP12™ is a world leading friction compound that is unmatched as a Ceramic racing compound, with a temperature range of 250°F to 2000°F+. The XP12™ still has that excellent Carbotech release and modulation that has made all other Carbotech compounds so successful. The XP12™ is the most rotor aggressive compound Carbotech offers, but compared to the competition the XP12™ is still very rotor friendly and contains 100% non-corrosive dust. XP12™ is recommended only for expert/very advanced drivers. XP12™ is found to be most affective on race cars weighing 2,400lbs or more using R-Compound tires; or street cars weighing 3,200lbs or more for track use only.  Ideal for Spec Miata, Showroom Stock classes, T3,  Koni ST, MX-5 Cup, etc…   XP12™ is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise.

Master Disconnect Switch

MAZDASPEED MOTORSPORTS is proud to announce that we are now selling the Taylor Vertex Master battery disconnect switch, #1033.

4-POST SWITCH

• Has 2-additional terminals etc. hookups.
• Designed to provide a of the entire electrical
• Required on all NHRA Modified and Super Stock classes
• Power cut off required per NHRA Rule 8:4

Order under MAZDASPEED part number 0000-10-9201

This wheel is a 15″ x 7″ wheel with a 25mm offset - the maximum legally allowed. Weighing in at just over 13 lbs. The wheel has a matt black finish and should be in stock starting in January.

Tim has run this wheel on his own Spec Miatas for two seasons now.  He has found them to be strong and easy to clean as well as good looking.

You can order it online now under part number 0000-04-5801. Priced at $148.00 each.

SM-T? SSM?

A little sneak peak video into what we’re developing next. Filmed by Team All Stars.

Give some comment luv. Let us know what you think. After watching the video, view additional pictures here,

http://smugshots.specmiata.com/main.php?g2_itemId=10061

New ZOOM-ZOOM decal (blue background not included)

We now have the newly designed ZOOM-ZOOM decals in stock. This is in the new font, as shown on the front page of our website.

It is a white, die-cut decal with no background. 8″ long x 3/4″ high. These can be used level or placed at a 30 degree angle (so that the letters appear vertical - as shown in image to right)

Now available for order under part number 0000-10-DZM8-WH

Chase Cam Digital Recording Package

MAZDASPEED MOTORSPORTS is proud to announce the availability of the Chase Cam Digital Recording package. Working with Chase Cam, we have put together a recording package for our racers that includes the most popular options all in one package, and an additional add-on package with an exra camera and video processor. (photo of kit is not correct).

Pricing is shown only to racers logged in to the store. Please add to your shopping cart to see pricing. Substantial discount over buying pieces separately elsewhere.

Main Kit - Main Recording Package 0000-10-9100-KT
Optional Kit - Additional add-on camera package 0000-10-9101-KT (REQUIRES MAIN KIT)

Our 0000-10-9100-KT Main Kit Includes:

• PDR100GF/SC Solid State Video Recorder with G-Force and Auto-Record, and super capacitors built in rechargeable Battery Pack w/charger (This is not the regular PDR100)
• 520 Line Bullet Camera
• 4GB Compact Flash Card (rather than 2GB)
• EZ-20 Mount
• CC-10 Mount
• Cigarette Lighter Adapter
• Audio Line-In Adapter (RCA to 3.5mm Line In)
• Adapter Cable, Mini DIN Male

Optional Extra (Requires above kit)

We also have an optional second camera kit which includes a second 520-line bullet camera and the SS1000 Split Screen PIP Processor.

The Optional 2nd camera kit is part number 0000-10-9101-KT. SS1000 shown near bottom of page. Requires 0000-10-9100-KT to work.

PDR 100GF/SC

PDR 100GF/SC

Standard unit with battery power and hardwire options
PDR 100GF/SC This is our latest PDR (No battery capabilities. Unit must be hardwired)
G-Force Super Cap unit has a built in G-Force Module and super capacitors.

Features include:

• Auto power on. (requires unit to be hardwired, preferably to the master switch)
• Auto record at start. (Motion sensing)
• G-Force meters on screen display. (user programmable)
• Automatically saves the video file even if power is lost.

View Sample Videos at Chase Cam’s Website

• The PDR100 will power on as soon as it receives power.(requires unit to be hardwired)
• The G-Force Module will trigger the PDR100 to begin recording once it senses vehicle motion. You set the sensitivity.
• The G-Force Module will trigger the PDR100 to stop recording after it senses no motion for a period of time (user set).
• G-Force meters on screen display (user programmable)
• The Supercaps will power down the PDR100 approx 5 seconds after wired power is terminated.

Summary of Features

• RUGGED - SHOCK RESISTANT! NO MOVING PARTS.
• FORGET THE TANGLE OF WIRES!
• SIMPLE PLUG AND PLAY. EASY TO USE!
• HIGH QUALITY DIGITAL MPEG-2 VIDEO!
• SMALL and LIGHT
• Records high quality digital audio and video directly to removeable Compact Flash cards
• Field upgradeable! Simple and effective boot up and load new software feature. Download the latest software
• from the ChaseCam website!
• Typical 2GB CF card can hold approx 1 hour of video at normal resolution!
• Video looping feature (user selectable) continuously records until stopped
• Able to trigger activate.
• Optional wired remote for easy power and start/stop recording. LED feedback on remote
• Can use certain industry standard LAN-C remotes.
• Powered by external 12VDC or internal Lithium AA batteries (four). Provides 12VDC power to external cameras(300ma max)
• On board high quality 2-channel microphone, user gain adjustable.
• Accepts external audio or common microphone inputs, user gain adjustable.
• Outputs in real time audio/video to external monitor and/or headphones.
• Shock proof, ruggedized.
• Can use standard RCA jacks (with adapter) or MiniDin connectors.
• Internal optional G-Force module for on-screen g-force graphics and auto record feature.
• Video is already digital and ready for transfer to CD/DVD or to a computer or internet.
• MPEG-2 for easy DVD creation and higher quality.
• Can be used for playback. Easy selection of files. Menu LCD and membrane switch panel for programming and selections. Easy single button to turn it on and off, and to start/stop recording. LED indicates power and record status. You always will know what the PDR is doing!
• Easily mountable to almost anywhere.
• Connects directly to ChaseCam bullet cams (one connector for MiniDin version)
• Can use large capacity CF cards (16 gigabytes).
• Intelligent power supply can filter out dirty external power and voltage swings. Will sense power drop off and can switch to internal batteries.
• Approx 3.9″ x 5″ x 1.8″14 ounces without batteries. 17 ounces with batteries.
• Field flash upgradeable using factory supplied upgrade CF cards.
• Built in connectivity to various data acquisition company products.
• G-Force graphics overlay option coming soon.
• Laptimer, date/time display coming soon.
• With lower bitrate settings and smaller screen size setting, you can hold 24+ hours of video on a large CF Card. On a 16gig card, you could hold 40+ hours of video! Great for security use.
• RS-232 interface for future expansion and use with data acquisition.

Cam 520

CAM-520

The 520 Line Bullet Cameras are very small, lightweight, weatherproof, and rugged. Optimized for racing. This camera outputs standard analog video ( NTSC format). Because of its low weight, there’s less “mass” undergoing shock and vibration which means a more stable image, higher reliability and less chance of damage.

Product Features
Vivid full color CCD camera
Performs well in low light: 2 lux color captures crisp 24-bit color images up to 640×480 in size (520+ lines!) PAL or NTSC(United States) format optional
Operating temperature range: -10C to 40C
Auto white balancing with some minor limitation in very bright ambient i.e. bright sunlight on light pavement

*Microphone not included

EZ-20 ROLL BAR MOUNT (below camera)

EZ-20 Roll Bar Mount

Our most popular Rollbar/Cage mount, used in both amateur and professional motorsports worldwide! The (EZ20) EZMount, designed to easily and securely mount a camera or camcorder to any pipe, tube, or bar 1.25″ to 2″ in diameter. Uses high quality black anodized aluminum alloy body and stainless steel hardware. Supplied with vibration dampening protective rubber.
Product Features
Easily moved and adjusted
Accomodates a range of sizes
Made from high quality black anodized aluminum alloy
All hardware is high grade stainless steel
Supplied with vibration dampening rubber to protect your rollbar
Small, compact, lightweight
Can hold bullet cams and full size camcorders, very reliable!
Works well in combination with CC10 clamp mount

CC-10 CRADLE MOUNT

CC-10 CRADLE MOUNT

Provides a more secure and vibration free mount than using the rear bullet cam attachment point. The center reduces vibration and stops the potential damage to the bullet camera from over-tightening to the rear tripod mounting point.

The Chasecam Cradle will enable you to securely clamp your bullet camera to almost anything. At the business end of the cradle, is a stainless steel strap that wraps around your camera and provides an incredibly strong and secure method of holding the camera. The bullet camera rests on a strong glass-filled nylon base. The Cradle sits on an cleverly designed bracket that allows you to mount directly to a standard tripod mount. We recommend always using one of these cradle mounts with our Bulletcams and mounting systems as it provides a more secure alternative to the Bulletcam thread at the rear of the camera.

Product Features
Provides more mounting options.
Reduces peak shock and vibration to the camera.
Mounts to a standard tripod mount, a custom mount, or a rollbar/frame.
Made from the highest quality materials.

SS1000

SS1000 Split Screen Video Processor

Our 2nd camera kit, 0000-10-9101-KT, includes another 520-line bullet camera and the SS1000 Split Screen Video Processor. Not sold separately. This requires the first main kit, 0000-10-9100-KT.
SS1000 Split Screen Video Processor. Allows two camera input. Overlays video either as a vertical split screen, or as a “Picture In Picture.” User can position PIP left or right, top and bottom in two sizes. Lap timer clock included (user-selectable). Camera mirror function (user-selectable). Fully compatible with the PDR100 Solid State Digital Video Recorders.

Product Features
12V DC Operation. Standard 2.1mm DC Jack and two pin terminal block.
3 RCA Jacks. Two camera input, one video output….must provide power to cameras.
3 MiniDIN connectors. Two camera input and one video output. Powers ChaseCam bullet cameras
Power LED
4″ x 5″ x 1.8″
11 Ounces
PAL and NTSC formats, auto-sensing.

These will fit any 2006-2008 MX-5. Slightly altered, they can be made to fit earlier Miatas as well.

These can be ordered online under number 0000-07-5804

0000-04-7404-KT

Our Toe Steer Eliminator bushings for the 2nd Gen RX-7 have been updated. They used to be made of Delrin which ended up being too time consuming to manufacture. We have changed them to aluminum and they are now in stock.

The part number is still the same: 0000-04-7404-KT

New Gear at the MAZDASPEED Apparel Stor

There are some new additions to the MAZDASPEED apparel store. In addition to some new apparel items, we are proud to announce new MAZDASPEED MOTORSPORTS DEVELOPMENT gear!

We now have BIG coffee mugs, Insulated Kegs and Lanyards to hold your pit pass.

Apparel and Gear items are only available to current members and only through the directly link to the Apparel site from within our own online store. Racers should LOG IN and then click on the MAZDASPEED APPAREL link to access the apparel and gear store.

0000-07-5800

MAZDASPEED MOTORSPORTS DEVELOPMENT is proud to announce availability of
a fiberglass interior door panel kit for the 1990-2005 Miata.

Cutouts are already integrated to clear your roll cage bars.

Update
to a cleaner look!

Part number 0000-07-5800